Waterproof test
Waterproof Test
To make sure the seal tape is 100% waterproof, the test is not avoided even though it is a very complicated work. We must test one by one for every product no matter how many they are.
The test of waterproof
STEP.1 : to deep the wader into the pool
![deep the wader into the pool](/Templates/pic/m/Waterproof_Test-step1.jpg)
STEP.2 : to check if there is bubble coming from the wader.
That means the air is going through out from the wader
The problem one will be sent back to the prodcuing line for repairing
![check if there is bubble coming from the wader](/Templates/pic/m/Waterproof_Test-step2.jpg)
STEP.3 : to make a mark on the place where the bobble is coming from
![make a mark on the place where the bobble is coming from](/Templates/pic/m/Waterproof_Test-step3.jpg)
STEP.4 : hang the wader to be dry after the water testing
![hang the wader to be dry after the water testing](/Templates/pic/m/Waterproof_Test_Dry-step4.jpg)
![hang the wader to be dry after the water testing](/Templates/pic/m/Waterproof_Test_Dry_wader-step4.jpg)